Page 1 of 1

The Energy Transfer Plate

Posted: Wed Jun 27, 2018 11:44 pm
by Blaze.ChaosMG
ETPlate Cover.jpg
As the name suggest, this device is used to move energy from one location to another.
Energy can be transferred from anything like people, objects, locations, sigils etc. and sent to a person, location, object etc.
The device has 3 components/stages, input, filter and output.

Input:
The input continually absorbs ambient energy and charges the amplification pattern located in the centre of the input plate.
The amplification pattern stores most of the ambient energy and discharges the rest to passively flow through the circuit.
The passive energy flow is required to power the filter and maintain/increase its effectiveness.
The amplification pattern only releases its stored energy when an operation is initiated. Placing anything on the amplification pattern signals the operations start.

Filter:
It filters (tries to remove any unwanted energies).
Purifies (It infuses an additional energy to draw out the input energies best qualities).
Finally it structures the energies into a more fluid and gentle pattern before it moves to the Output Plate.

Output:
The Output has a similar setup as the input but operates a little differently.
It also absorbs ambient energy and charges the pattern in its centre but that isn't an amplification pattern exactly and it doesn't store any energy, the energy is still drawn there but it flows passively through the pattern outward.
That pattern captures intent, so if you want to transmit an intent, you focus your intent on that pattern before placing your target.
It has a second function which is to create a protective field around the target that allows only the energies present within the device to penetrate it.

Also included are two bonus sigils that emulate certain planetary elections.
Jupiter-Spica Sigil - Wealth, Abundance, Good Fortune.
Venus-Pisces Sigil - Sexual Magnetism, Charm, Love, Attractiveness.
These sigils have additional attributes, you can google the planets/stars and there correlations.

Example: (In this example we will be turning a piece of quartz into a money magnet)

You will need:
1) Printout of the Energy Transfer Plate
2) Printout of the Jupiter-Spica Sigil
3) A crystal or anything really, can be a person but for this example let’s go with a piece of Quartz.
4) A Magnet
5) A Bank note (any denomination)

After printing the ETP, you should wait 90 minutes before using it, this is to allow it to build its charge.
Once the device is ready for operation, place the Jupiter-Spica Sigil on the Input plate, on top of the amplification pattern.
Now pick up the Bank note and magnet, place the magnet in the centre of the Bank note and fold it over. Next close your hand and gently move your fingers to feel the texture of the money and keep your focus on the fact that you have the money and magnet in your hand. Do this for about 30 seconds.
Next, shift your focus to the intent pattern in the Output plate, and while still gently rubbing the Bank note, think "Attract an endless flow of money". Do this for about 1 minute.
Finally, place the crystal inside the Output plate on top of the intent pattern.

That's it. Like I said "simple" but should provide you with a general understanding of how to use the circuit.

https://sellfy.com/p/pHWk/

Re: The Energy Transfer Plate

Posted: Sat Dec 21, 2019 4:34 am
by Witness
Hey Blaze

I want to purchase this but I have a few questions.

The description said that the energy transfers energy from one place to another, whether it be a person object or item. My question is "energy" is a very broad term. Like if I want the energy of say a lion, which aspects of the lions energy would we be programming and can we get specific with what kind of energy we want from a person, object or location? Like say I want the energy of a lion... But what I really want is the energy of the lion's roar of the energy of the lion's prowl and then maybe transfer those characteristics and behaviors into my own energy. So the effect may result in a louder more powerful voice or a more confident walk. How specific can we be when requesting a certain type of energy?

Could we take the energy of a inanimate or non living thing and program the function of that energy into a specific part of me? For instance, can I take the energy of a specific quantum computer. Instead of just wanting the energy of the quantum computer, could we program the computing power of a quantum computer and then transfer it to my brain... Or even more specific, the hippocampus or another area. Again, how general and how specific?

I have so many cool things I want to try but I just need to know what we can really do

And as far as the source of the energy can we get it from anything or anyone? Whether it's someone we see in a video on YouTube or a picture.

Re: The Energy Transfer Plate

Posted: Sun Dec 22, 2019 5:43 pm
by Anderson
I print on one side of the Energy_Transfer_Plate sheet and on the reverse RBE_PRO, the effect is super, the energy feels very good. I tried to put a photo of a bodybuilder at the entrance on my way out, sensations began to arise in the muscles, after a couple of weeks I began to feel the energy shell around the body, and also the strength increased.

Re: The Energy Transfer Plate

Posted: Tue Dec 31, 2019 5:01 am
by rharishb
Can this be used digitally i.e. without printing it?

Re: The Energy Transfer Plate

Posted: Wed Jan 01, 2020 2:39 pm
by Blaze.ChaosMG
rharishb wrote: Tue Dec 31, 2019 5:01 am Can this be used digitally i.e. without printing it?
It's not recommended but not impossible, you cant edit it directly so 2 simple workarounds is;
1. Open the ETP in a image viewer then stick the source and target images to the screen accordingly. On something like a tablet that you can place horizontally, you can just lay down the images as you would on a physical copy.

2. Load the ETP as your wallpaper then using an application like VLC which can open multiple instances and has a minimal interface, Open your target and source in seperate windows, reduce and align it to fit the input and output.

Re: The Energy Transfer Plate

Posted: Sun Jan 05, 2020 8:29 pm
by Witness
Blaze.ChaosMG wrote: Wed Jan 01, 2020 2:39 pm
rharishb wrote: Tue Dec 31, 2019 5:01 am Can this be used digitally i.e. without printing it?
It's not recommended but not impossible, you cant edit it directly so 2 simple workarounds is;
1. Open the ETP in a image viewer then stick the source and target images to the screen accordingly. On something like a tablet that you can place horizontally, you can just lay down the images as you would on a physical copy.

2. Load the ETP as your wallpaper then using an application like VLC which can open multiple instances and has a minimal interface, Open your target and source in seperate windows, reduce and align it to fit the input and output.
I asked a question in the thread. I was wondering if you could address it. I got it a few days ago and am wondering how I can use it

Re: The Energy Transfer Plate

Posted: Mon Jan 06, 2020 10:57 am
by Blaze.ChaosMG
Witness wrote: Sun Jan 05, 2020 8:29 pm I asked a question in the thread. I was wondering if you could address it. I got it a few days ago and am wondering how I can use it
Hi Witness, I apologies for not answering your questions, the one about inanimate objects (specifically regarding a quantum computer) was unique and I wanted to run some test when I had time before giving you a response, I haven't had time to do that yet so all I can do is give you my current best estimation of what might work. I'll answer them in order.

1. The energy transfer is by default done so in its entirety. Meaning the energetic makeup of that particular lion will be overlayed onto yours and integrated. In order to copy specific trait, you must isolate them with intent, you can do that using a fairly simple method.
Once you have a printout of the lion you'll be using, imagine it, hear it roar, feel the vibrations it causes and when you feel the intention is clear, write onto the image, ROAR and repeat for PROWL. So the input image will be a photo of the lion with the words Roar and Prowl written on it. The words become an anchor for your intent and will act to isolate the correct energies for transfer. Unfortunately, you can't use the output pattern for this because the energies would already be transferring and its function isn't to filter out those energies just add function to it.

2. Inanimate objects are comprised of energy and therefor has a field to transfer so if one holds anything worthwhile, you can do so.
I'm not certain about being able to copy the computing power without doing some test but it might be possible because when it is in operation, it will produce a energy field that is only available while it is computing so what could work is; first find a video of a quantum computer that is actively performing computations etc. clip that video into something that can be used as the input for the ETP then load that clipped vide into VLC and perform the transfer digitally as I described in the second example for using the device digitally alternately, you can load and open the clip on a phone and use it as the input on a printout of the ETP. I would also recommend using the method for anchoring intent as described in the example with the lion to identify computing/processing power as the desired input, I'm not really sure how to visualize that exactly so some creativity here will be required. Write the words on a piece of paper and place it over the video, if you using the digital method, you'll need to stiack it to the screen, A post-it will work well and shouldn't leave glue on your screen that needs to be cleaned.

Re: The Energy Transfer Plate

Posted: Mon Jan 06, 2020 2:01 pm
by Witness
Thank you!

This is actually awesome and exactly what I was hoping I'd be able to do with this. Just being able to program specific energies via intent is so exciting. Anything is possible now I just have to figure out exactly where I want to start!

I will have more questions but for now this is excellent!

Than you Blaze

Re: The Energy Transfer Plate

Posted: Tue May 04, 2021 1:41 pm
by Anderson
I tried to transmit Opti-Men vitamins through the plate to myself, and somehow I didn't really notice the effect. The other day I tried it with a Viagra pill, and after about 30-40 minutes there was excitement and an erection, I was a little shocked, because I didn't really believe that this is possible, it's cool!